Install luggage compartment wheel arch trim panel, left
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Feed in the luggage compartment wheel arch trim panel (2) under the side trim panel in the rear passenger compartment and the sealing lip for the trunk lid.
- Feed in the lug of the luggage compartment wheel arch trim panel (2) on the outer side of the hinge into the stop on the trim (1).
- Secure expanding rivet (1).
- Put up the left rear seat backrest.
- Position the lashing point (3).
- Tighten down screw (2).TIGHTENING TORQUE SPECIFICATIONS
Lashing point to body tightening torque 19 Nm - Install cover (1).
Follow-up work
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .