Installing the armrest on the side trim panel
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Cut all the welding pins (1) of the armrest on mark (2) as shown.
The welding pins (1) must not protrude from the side trim panel.
- Install the armrest.
- Screw in and tighten the repair screws (arrows).TIGHTENING TORQUE SPECIFICATIONS
Armrest on side trim panel Screw tightening torque 1.8 Nm
Follow-up work
- Refer to INSTALLING THE SOUND INSULATION ON THE SIDE TRIM PANEL .
- Refer to INSTALLING REAR TRIM PANEL .
- Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
- Refer to INSTALLING C-PILLAR TRIM PANEL .
- Refer to INSTALLING BACKREST SIDE SECTION .
- Refer to INSTALLING THE REAR SEAT .