Installing both headlights

Install headlight 

Checking blocking of the horizontal setting 

• See ADDITIONAL INFORMATION .

• Feed in and correctly position the headlight (3).
• Tighten down screws (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2).

• Connect plug (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position holder (2).
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the adhesive tape in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BUMPER COVER, FRONT .
• Refer to INSTALLING FRONT SECTION OF THE FRONT WHEEL ARCH COVER (PARTIALLY REMOVED) .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to INSTALLING THE COVER ON THE LEFT AND RIGHT IN THE ENGINE COMPARTMENT AT THE TOP .
• Refer to ADJUSTING HEADLIGHTS .