When replacing the rear bumper trim: Remount the rear bumper trim at the center bottom

Remove the rear bumper trim at the center bottom 

• Loosen the expanding rivet (1)  .
• Release the trim (2)  at the detents (arrows) and remove from the bumper cover.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Install the rear and center bumper trim 

  NOTE: TECHNICAL INFORMATION 
  Detents, guides and mounting elements must not be damaged or missing.
• Attach the trim (2)  and engage at the detents (arrows) of the bumper panel.
• Mount the expanding rivets (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.