Install fanfare horn, right
NOTE:
TECHNICAL INFORMATION
Only replace the fanfare horn complete with the holder.
Only replace the fanfare horn complete with the holder.
- Secure the fanfare horn and holder (3) using a blind rivet (2).
- Connect connectors (1) and lock.
- Equipment specification with radiator:
Insert the air duct (2).
Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Air duct to radiator | ||
|---|---|---|
| screw | Tightening torque | 3 Nm |
Follow-up work
- Refer to INSTALLING THE FRONT BOTTOM WHEEL ARCH COVER .