Installing the clean air pipe for cylinders 1 to 3
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Check seal (1) for damage and, if necessary, replace it.
- Lock clamp (1).
- Guide in and install clean air pipe (4) for cylinders 1 to 3.
- Ensure that clamp (3) locks audibly.
- Secure expanding rivet (2).
- Tighten clamp (1).
TIGHTENING TORQUE SPECIFICATIONS
| Clean air pipe to upper section of intake filter housing | ||
|---|---|---|
| cl. | Tightening torque | 3 Nm |
Follow-up work
- Refer to INSTALLING THE FRONT-END STRUT .