Install front door trim panel

• Attach the Bowden cable (1) in area (2) in the door trim panel.
• Check the clips (arrows) (3) for damage and replace if necessary.

  The clips (3) must not be engaged. The disengaged state is shown.

• Check the clip (4) for damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the Bowden cable (1) for the release lever on the door lock (3).
• Attach the Bowden cable (1) for the release lever on the counter support (2).
• Connect all connectors and cable brackets of the wiring harness (4) to the door trim panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the door trim panel (1) at top into the window cavity seal.
• Clip the door trim panel (1) into the clips.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Door trim panel
  screw	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• INSTALLING THE MIRROR TRIANGLE COVER .
• ATTACHING THE COVER TO THE DOOR HANDLE .