Remove the DSC control unit
NOTE:
RISK OF DAMAGE
Electrostatic discharge .
Damage to or destruction of electrical components .
Electrostatic discharge .
Damage to or destruction of electrical components .
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .
NOTE:
TECHNICAL INFORMATION
Maintain conditions of absolute cleanliness.
Maintain conditions of absolute cleanliness.
Preliminary work
- Refer to INSTALLING BRAKE PEDAL TENSIONER .
- Refer to DETACHING COOLANT EXPANSION TANKS .
- Refer to REMOVE HYDRAULIC UNIT .
- Release screws (1)
and remove the holder (2)
.
- Loosen screws (1) .
- Remove DSC control unit (2) carefully.
When removing the DSC control unit, no contacts must be bent!