Secure the top wishbone on the swivel bearing
- Position upper wishbone (3) on the swivel bearing (4) .
- Replace the screw (2)
and the nut (1)
.
Parts: Bolt, nut
- Insert screw (2)
.
The screw (2) must be positioned in the groove of the pin from the top control arm (3) .
(F) = driving direction
- Tighten nut (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Upper wishbone to swivel bearing | ||
|---|---|---|
| M10 Replace screw and nut. |
Tightening torque | 56 Nm |