Remove both rear seats
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing the seat
- Loosen screw (1).
- Guide out safety belt (2) and put to one side at top.
- Fully shift the rear seat backrest forwards.
- Loosen nuts (1) to (4).
- Loosen cover (1) in the area (2) toward the inside of Velcro fastener.
- Detach cover (1) toward the top from the seat mechanism.
- Loosen nuts (1) to (3).
- Fold seat forward slightly.
- Unlock plug connections and disconnect.
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp edged components.
Scratches, surface damage.
Careless handling of tools and sharp edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Lift seat out.