Installing left seat belt finisher strip
Install the seat belt finisher strip
- Install the seat belt finisher strip (1) and in this process, insert the end fitting.
- Insert the seat belt finisher strip (1) at the rear into the guides (3).
- Clip in the seat belt finisher strip (1) in the clips (2).
- Make sure that seat belt finisher strip (1) is correctly fitted against the edge protection.
NOTE:
TECHNICAL INFORMATION
Component is encoded against incorrect assembly.
Component is encoded against incorrect assembly.
- Mount end fitting (2).
- Replace the screw (1).
Parts: Screw
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| End lining to body | ||
| M10 Replace screw. |
tightening torque | 42 Nm |