Equipment specification of basic seat with pass-through system or ski and snowboard bag

Remove rear seat bench 

• Unclip the rear seat in the area (1) in upward direction.
• Feed out the seat belt buckle (2) from the rear seat.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slightly pull the rear seat (1) forward.
• Unlock and disconnect plug connections (2).
• Lift out the rear seat (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove rear seat backrest 

• Open the center armrest (1).
• Detach the lining (2) from the Velcro fastener.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Close the center armrest (1).
• Loosen screw (2).
• Remove the safety belt (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1) and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Slightly pull the rear seat backrest (1) forward at the bottom and detach it from the guides (2) towards the top.
• Pull the rear seat backrest (1) out from the safety belts and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.

Remove ski bag 

• Release the screws (1) the trim (2) of the ski bag in the vehicle interior.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove the trim (1) in the trunk towards the rear.
• Remove the ski bag towards the front.

Courtesy of BMW OF NORTH AMERICA, INC.