Install alternator
- Insert and install the alternator (3) .
- Feed in and position holder (2) .
- Tighten down screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Alternator to cylinder head M8x85 tightening torque 22 Nm - Connect connectors (3)
and lock.
The connector (3) must engage audibly.
- Tighten nut (2)
.TIGHTENING TORQUE SPECIFICATIONS
Positive battery cable to alternator M8 tightening torque 19 Nm - Mount the cover (1) on the nut (2) .