Bolt oil sump screw connection of the lower oil pan

NOTE: TECHNICAL INFORMATION
The seal must be replaced.

Position the oil sump (2) .
NOTE: TECHNICAL INFORMATION
Replace microencapsulated screws.
The screw lining must be completed within 15 minutes, as the hardening begins after this time period. Microencapsulated screws must not be retightened.

Courtesy of BMW OF NORTH AMERICA, INC.
Replace all bolts (1) .
Parts: Screws
Tighten all bolts (1) .

TIGHTENING TORQUE SPECIFICATIONS

Lower oil pan section to upper oil pan section
M8x25 Replace microencapsulated screws.	Tightening torque	27 Nm