Remove fan cowl
Precondition
- Ignition is switched off.
Preliminary work
- Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
- Refer to REMOVING BOTH FRONT-END STRUTS .
- Refer to REMOVING FRONT CROSS CONNECTION (FRONT-END STRUT REMOVED) .
- Refer to REMOVING THE REAR TOP CROSS CONNECTION .
Precondition
Ignition is switched off.
- Unlock connector (1) and detach.
- Loosen screws (2) .
- Release coolant hose (4) from fan cowl (3) .
- Feed out fan cowl (3) upwards and remove.