Removing the right door lock
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to REMOVING THE WINDOW CHANNEL STRIP ON THE FRONT DOOR .
- Refer to REMOVING THE MIRROR TRIANGLE COVER .
- Refer to REMOVING THE DECORATIVE STRIP FROM THE DOOR TRIM PANEL .
- Refer to REMOVING FRONT DOOR TRIM PANEL .
- Refer to REMOVING THE MODULE BRACKET FROM THE FRONT DOOR .
- Refer to REMOVING FRONT DOOR WINDOW GLASS .
- Release the soft-close motor (1) from the door.
- Disconnect the plug connection at the drive for the soft-close automatic function (1).
- Unclip locking rod (1).
- Loosen screws (3) and (4).
- Disconnect the plug connection from the door lock (2).
- Guide out door lock (2).
- Detach the Bowden cable (1).
- Detach the Bowden cable nipple (2).
- Remove door lock.