Install Hood
NOTE:
RISK OF DAMAGE
Mechanical effects.
Paint damage.
Mechanical effects.
Paint damage.
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
NOTE:
Perform the steps on the right and left side.
- Position the hood on the hinge.
- Support the hood.
- Tighten nuts (2) and (3).
TIGHTENING TORQUE SPECIFICATIONS
Hood to the hinge Nut M8 Tightening torque 19 Nm - Install the protective cap (1).
Follow-up work
- Refer to INSTALLING THE NOZZLE CHAIN .