Install left and right wiper arm

NOTE: Description is for left component only. Procedure on the right side is identical.

NOTE: TECHNICAL INFORMATION
The window wiper system must be in the zero position.
After installing the cowl cover and before installing the wiper arms:
Operate the window wiper system one time, to ensure the window wiper system has the correct installation position.

Insert the wiper arms (3).

Correctly position the wiper arm (2) in relation to the window edge (1).

TECHNICAL DATA SPECIFICATION

Distance from window pane edge to wiper blade
Wiper arm right (A)		65 mm
Wiper arm left (B)		58 mm

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Description is for left component only. Procedure on the right side is identical.

Tighten nut (2).

TIGHTENING TORQUE SPECIFICATIONS

Windshield wiper arm
Combination hexagon nut	tightening torque	35 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect the protective cap (1).

Follow-up work

Refer to INSTALLING THE WIPER BLADE .