Installing the rain-light-solar-condensation sensor

• Check the windshield in the area (1) for contamination.
• Clean the windshield in the area (1) as appropriate.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the rain-light-solar-condensation sensor (1) in arrow direction into the holder (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Centrally press on the rain-light-solar-condensation sensor (2) onto the retaining spring (3).
• Successively press down the retaining springs (4) on each side to lock it.
• Connect plug (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Normally existing air pockets disappear within 30 minutes.

Visible shades (1) and (2) are not air pockets but rather the optical element of the sensor. The shades do not represent any functional limitation.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE INTERIOR REARVIEW MIRROR .
• Refer to INSTALLING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .