Install center trim strip

• Check detents for damage.

  The detents must not be damaged or missing.

• Position the trim strip (1)  and lock at the detents.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING TRIM STRIP ON THE LEFT AND RIGHT .
• Refer to INSTALLING THE TRIM ON THE BUMPER COVER ON THE SIDE TO THE LEFT AND RIGHT .
• Refer to INSTALLING THE ORNAMENTAL GRILLE OF THE BUMPER PANEL ON THE LEFT AND RIGHT SIDE .
• Refer to INSTALLING THE FOG LIGHT BRACKET ON THE LEFT AND RIGHT .
• Refer to INSTALLING BUMPER COVER, FRONT  .
• Refer to INSTALLING FRONT SECTION OF THE FRONT WHEEL ARCH COVER (PARTIALLY REMOVED) .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .