Installing lower trim strip
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Check detents for damage.
The detents must not be damaged.
- Position trim strip (1) and engage in all detents.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Check detents for damage.
The detents must not be damaged.
- Position the trim strip (1) and engage it at the detents.
Follow-up work
- Refer to INSTALLING FOG LIGHT SUPPORT .
- Refer to INSTALLING BUMPER COVER, FRONT .
- Refer to INSTALLING FRONT SECTION OF THE FRONT WHEEL ARCH COVER (PARTIALLY REMOVED) .
- Refer to INSTALLING FRONT ORNAMENTAL GRILLE .