Install the reinforcement strut on the engine mount on the left and right
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install the reinforcement strut on the engine mount
- Position the reinforcement strut (1) .
- Screw in the screw (2)
by hand force.
- Tighten down screw (1) .
TIGHTENING TORQUES SPECIFICATION
| Engine mount reinforcement strut on body | ||
| M8 | tightening torque | 28 Nm |
- Tighten down screw (2) .
TIGHTENING TORQUES SPECIFICATION
| Engine mount reinforcement strut on front subframe | ||
| M8 | tightening torque | 28 Nm |