If installed: Install the silencer of the stationary heating
Install the silencer/stationary heating
- Insert and position the silencer (1) in the direction of the arrow.
- Secure the silencer (1) on the auxiliary heater.
- Tighten nut (3) .
TIGHTENING TORQUES SPECIFICATION
| Silencer on stationary heater | ||
| Nut | tightening torque | 6 Nm |
- Tighten down screws (2) .
TIGHTENING TORQUES SPECIFICATION
| Silencer on holder/holder on body | ||
| Screw | tightening torque | 8 Nm |
| Nut | tightening torque | 8 Nm |
Installing the front section of the front wheel arch cover
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Guide in the front section (1) of the front wheel arch cover.
- Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATION
| Wheel arch cover | ||
| screw | Tightening torque | 3 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |