Detaching the wiring harness of the EPS from the front axle support
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
Version A: Loosen wiring harness
- Unlock and disconnect plug connections (1) .
- Release the wiring harness in the areas (2) from the front subframe.
- Release the wiring harness in the areas (3) .
- Place wiring harness to one side.
Version B: Loosen wiring harness
- Unlock and disconnect plug connections (1) .
- Release the wiring harness from the front axle support in the areas (2) .
- Loosen the wiring harness (3)
from the retaining bracket.
- Release the wiring harness (1) in the areas (2) .
- Set wiring harness (1) aside.