1165 CHARGER WITH CONTROL (740i 2016-2022, 740i xDrive 2017-2022, 745e xDrive PHEV 2020-2022)
11 65 TIGHTENING TORQUE OVERVIEW
| Electrical controller drive to exhaust turbocharger | ||
| Replace screws. Tighten screws crosswise. |
Tightening torque | 3 ± 0.5 Nm |
| Exhaust turbocharger heat shield on crankcase | ||
| M6X12 Replace screws. |
tightening torque | 10 Nm |
| Exhaust turbocharger support to crankcase | ||
| M8 x 20 Replace screws. |
Tightening torque | 19 Nm |
| Exhaust turbocharger to cylinder head | ||
| M7 Replace screws. Replace nuts. |
1. Joining torque | 5 Nm |
| 2. tightening torque | 18 Nm | |
| 3. tightening torque | 18 Nm | |
| Exhaust turbocharger to support | ||
| M8 x 25 Replace screw. |
Tightening torque | 19 Nm |
| Heat shield of exhaust turbocharger to cylinder head top | ||
| M8X12 Replace screws. |
tightening torque | 19 Nm |