Remove the rear top cross connection
Preliminary work
- Refer to REMOVING THE COVER FOR THE CENTER ENGINE COMPARTMENT .
- Refer to REMOVING BOTH FRONT-END STRUTS .
- Refer to REMOVING FRONT CROSS CONNECTION (FRONT-END STRUT REMOVED) .
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Loosen screws (1) .
- Lift the support (2) of the left hood lock slightly and feed out the rear cross connection (3) to the rear.
- Lift the support (2) of the right hood lock slightly and feed out the rear top cross connection (3) to the rear and remove.