Install the headlining (with sliding/tilting sunroof)

Precondition 

Sliding/tilting sunroof is open.

Seat surfaces of the front seats are moved to the rear and down as far as possible.

Backrests of the front seats are folded back as far as possible.

• Check clips (2)  and replace if necessary.

  The clips must not be damaged or missing.

• Position headlining (1)  correctly with an support person and clip into the clips (2)  . Ensure a correct fit in the process.
• Feed in the headlining (1)  on the relative edge protection.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check clips (1)  and replace if necessary.

  The clips must not be damaged or missing.

• Clip the headlining in the clips (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Equipment specification with rear air conditioning/vanity mirror at the rear: 

  Tighten screws (1)  left and right.

  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Headlining
  	tightening torque	1.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Headlining
  	tightening torque	1.4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install trim (1)  and clip into the clips (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE INTERIOR REARVIEW MIRROR .
• Refer to INSTALLING THE COVERS FOR THE INTERIOR REARVIEW MIRROR .
• Refer to INSTALLING THE VANITY MIRROR LIGHT AT THE FRONT LEFT OR RIGHT .
• Refer to INSTALLING THE RIGHT HANDS-FREE MICROPHONE .
• Refer to INSTALLING ROOF FUNCTION CENTER (FZD) .
• Refer to INSTALLING THE SUN VISOR AND THE COUNTER SUPPORT .
• Refer to INSTALLING A-PILLAR TRIM PANEL .
• Refer to INSTALLING THE UPPER B-PILLAR TRIM PANEL .
• Refer to INSTALLING C-PILLAR TRIM PANEL .
• Refer to INSTALLING THE HOLDER ON LEFT OR RIGHT .
• Refer to INSTALLING BOTH REAR VANITY MIRRORS .
• Refer to INSTALLING BOTH FRESH AIR GRILLES IN THE HEADLINING .
• Refer to INSTALLING REAR INTERIOR ROOF LIGHT .