Install cover
- Install the cover (1).
- Tighten the bolts and nuts (arrows).TIGHTENING TORQUE SPECIFICATION
Underbody planking on body Hexagon screw tightening torque 2.6 Nm TIGHTENING TORQUE SPECIFICATIONUnderbody planking on body Plastic nut tightening torque 2.6 Nm - Install heat shield (1).
- Tighten the bolts and nuts (arrows).TIGHTENING TORQUE SPECIFICATION
Underbody planking on body Hexagon screw tightening torque 2.6 Nm TIGHTENING TORQUE SPECIFICATIONUnderbody planking on body Plastic nut tightening torque 2.6 Nm
- Install the cover (1).
- Tighten the screws (2).TIGHTENING TORQUE SPECIFICATION
Undershield screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm - Install the heat shield (2).
- Tighten nuts (1).TIGHTENING TORQUE SPECIFICATION
Undershield screw Tightening torque 2.6 Nm Plastic nut Tightening torque 2.6 Nm