Installing center ornamental grille

Replacement: Remounting the lid 

• Release and remove the lid (1)  from the detents (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fit the lid (1)  and clip it into the detents (2)  of the new part.

Courtesy of BMW OF NORTH AMERICA, INC.

Check 

• Check all detents (arrows) on the bumper cover (1)  for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The detents are damaged.

Measure 

• Replace the bumper cover.

• Fit the center ornamental grille (1)  .
• Clip in the center ornamental grille (1)  in all detents (arrows).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the wiring harness (1)  and hook it into the center ornamental grille.

Courtesy of BMW OF NORTH AMERICA, INC.