51 47 440 Removing and installing or replacing rear carpet on seat pan

Preliminary work needed: 

• Remove both front seats. Refer to REMOVING AND INSTALLING FRONT SEAT, PASSENGER'S SIDE .
• Refer to REMOVING REAR SEAT .
• Refer to REMOVING BOTH DOOR SILL COVER STRIPS .
• Refer to REMOVING COMPLETE CENTER CONSOLE .

Release expansion rivet (1).

Release trim (2) at clips (3) and remove.

Installation note: 

Replace faulty clips (3).

Remove trim (2) with preassembled clips (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Feed out associated cables.

Take out carpet (1) toward the top.

Installation note: 

Make sure apertures and attachment points are in correct position.

Courtesy of BMW OF NORTH AMERICA, INC.