Remove A-pillar trim panel

NOTE: Description is for left component only. Procedure on the right side is identical.

WARNING: Airbag unit .
Danger! Immobilization period-threatening injuries!

Before working on the airbag, disconnect the negative battery cable from the battery.
Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

Remove the cover (1) and unscrew the bolt below it.
Detach the A-pillar trim panel (2) inward from the clips (3) and the edge protection (4).
Thread the A-pillar trim panel (2) out of the dashboard toward the top.

Courtesy of BMW OF NORTH AMERICA, INC.