Installing/replacing license plate (without number plate baseplate)

Special tools required: 

• 2 359 575 

Place template 2 359 575  on license plate and center.

Mark and drill/punch drilled holes on license plate.

Deburr bores on the license plate.

Courtesy of BMW OF NORTH AMERICA, INC.

Place template 2 359 575  on bumper cover and align over the marks (1).

Align template horizontally.

Mark drilled holes on bumper cover.

Remove template.

Mount license plate to bumper cover using license plate screws and the corresponding protective caps.

Courtesy of BMW OF NORTH AMERICA, INC.