Installing Roof function center (FZD)

NOTE: RISK OF DAMAGE
Electrostatic discharge .
Damage to or destruction of electrical components .

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION

Connect associated plug connections.
NOTE: TECHNICAL INFORMATION
Detents, guides and mounting elements must not be damaged or missing.
Feed in the Roof function center (FZD) (1) in front and clip it in toward the top.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Disconnecting the plug connection for the emergency call button results in fault code entries in the telephone control unit (restriction in the emergency call system).
After installation, read out the fault memory and, if necessary, delete the fault memory entries.
Read out fault memory.

Sliding/tilting sunroof functional check

NOTE: TECHNICAL INFORMATION
Notes on the initialization of the glass slide/tilt sunroof are a fundamental requirement for these repair instructions and must be complied with at all times.
For additional information see: NOTES ON GLASS SLIDE/TILT SUNROOF (INITIALIZATION/STANDARDIZATION/LEARNING OF CHARACTERISTIC CURVE) .

Check

Result

» Malfunctions (e.g. no one-touch mode, does not open or no convenience function available).

Measure