51 12 812 Replacing left (or right) deformation element (i3s)

Preliminary work needed: 

• Refer to REMOVING SUPPORT FOR BUMPER COVER .
• Refer to REMOVING REAR WHEEL .

Release screw (1) and allow sensor (2) to hang downwards.

Installation note: 

Ensure that the holder (3) is correctly positioned.

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Tightening torque 51 12 6AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and pull out deformation element (2).

Tightening torque 51 12 7AZ .

Courtesy of BMW OF NORTH AMERICA, INC.