Installing the throttle body

• Replace sealing ring (1)  .

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace sealing ring (1)  .

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and install the throttle body (3)  .
• Connect and lock the connector (2)  .
• Tighten screws (arrows).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Throttle body to intake plenum
  M6X50	Snug torque	4 Nm
  	Tightening torque	7 Nm

• Tighten down screw (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Throttle body to holder
  M6X25	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install charge air line (1)  .
• Tighten screws (arrows).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Charge air line to throttle body
  M6	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1)  .
• Connect and lock the connector (2)  .
• Secure clamps (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .