Removing the trim panel for pedal assembly
- Version A:
- Turn the locks (3) by 90°.
- Unclip the trim panel for pedal assembly (1) in the area (2) in an inward direction.
- Detach the trim panel for pedal assembly (1) inwards from the guides (4) .
- Unlock associated plug connections and disconnect.
- Version B:
- Unclip the trim panel (1) inwards in area (2) .
- Release screws (3) .
- Detach the trim panel (1) inwards from the guides (4) .
- Unlock associated plug connection and disconnect.
- Remove the trim panel (1)
.