Remove front seat
Precondition
- Convertible top is completely open.
Preliminary work
- Refer to REMOVING THE FRONT STRAP FITTING .
WARNING:
Pyrotechnic components.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
- Adjust the front seat fully to the rear.
- Loosen screws (1).
- Adjust the front seat fully to the front.
- Loosen screws (1).
Deactivate vehicle electrical system
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
Careless handling of tools and sharp-edged components.
Scratches, surface damage.
- Protect working area.
- Handle tools and components carefully.
- Cover the door sill using protective covers.
- Place the front seat fully to the rear and disconnect the plug connector (1).
NOTE:
RISK OF DAMAGE
Heavy component.
Heavy components can lead to injury or damage.
Heavy component.
Heavy components can lead to injury or damage.
- Remove and install heavy components with the aid of another person/other persons.
- Remove the front seat with the assistance of an support person.
For continuing work on the front seat: Mount front seat on universal seat mount and connect to wiring harness if necessary
NOTE:
TECHNICAL INFORMATION
Use of the universal seat mount is recommended for carrying out expert repairs.
Use of the universal seat mount is recommended for carrying out expert repairs.
- Fit special tool 2 473 334
onto special tool 0 495 187 (00 2 300). CAUTION: Heavy component.
Heavy components can lead to injury or damage.- Remove and install heavy components with the aid of another person/other persons.
- Mount the front seat onto the special tool 2 473 334.
To ensure a professional repair, using special tools 0 495 187 (00 2 300) and 2 473 334 is recommended.
NOTE:
TECHNICAL INFORMATION
Only carry out the following step if the front seat needs to undergo electrical adjustment.
Only carry out the following step if the front seat needs to undergo electrical adjustment.
- Connect special tool 0 496 519 (61 4 150) for adjusting the removed front seat with wiring harness of the vehicle and the removed front seat.