Installing the antenna amplifier
- Correctly position the antenna amplifier (3) .
- Tighten down screw (2)
.TIGHTENING TORQUE SPECIFICATION
Antenna amplifier to body Screw tightening torque 3 Nm
NOTE:
TECHNICAL INFORMATION
The number of connectors on the described component may vary depending on the equipment version.
If necessary, unlock and disconnect, or connect and lock, all other connectors.
The number of connectors on the described component may vary depending on the equipment version.
If necessary, unlock and disconnect, or connect and lock, all other connectors.
- Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING THE TAILGATE TRIM PANEL .