11 36 Variable Camshaft Timing Control (X6 M)
11 36 VARIABLE CAMSHAFT CONTROL - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ VANOS gear to inlet and outlet camshafts (contact surface on screw head must be greased with assembly paste 4.4 ) | S63T 2 | M10x1 | Replace screw. | |
| Joining torque | 25 Nm | |||
| Angle of rotation | 120° | |||
| 2AZ Non-return valve VANOS to cylinder head | S63T 2 | M14 x 1.5 | 20 Nm | |
| 3AZ Solenoid valve holder to cylinder head | S63T 2 | M6 | 10 Nm |