Removing and installing/replacing seal for tailgate (X6 M)

Follow the NOTES on fitting seals.

Removal:

Pull off gasket (1) towards the top, starting from the sealing joint (2).

NOTE: Sealing joint (2) is vulcanized.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Part: Replace gasket (1).

NOTE: The gasket (1) has to be replaced, as otherwise tightness can no longer be guaranteed.

Mount gasket (1). Make sure that the sealing joint (2) is at the indicated position.

NOTE: Make sure that the gasket (1) lies correctly on the adjacent trim panel components.

Courtesy of BMW OF NORTH AMERICA, INC.