Remove and install the center dashboard cover (X6 M)

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary tasks: 

• Remove the CENTRAL INFORMATION DISPLAY .

Release screws (1).

Unclip the trim (2) from the clamps (3) by pressing toward the back.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Replace faulty clamps (1).

Guides (2) must not be missing.

When fitting the cover, make sure guides (2) are correctly seated.

Courtesy of BMW OF NORTH AMERICA, INC.