Remove washer fluid reservoir

Preliminary work 

• Refer to REMOVING THE RECORDING OF THE RIGHT HOOD SEAL .
• Refer to REMOVING THE WHEEL .
• Refer to REMOVING THE FRONT WHEEL ARCH TRIM .
• Refer to REMOVING THE REAR SECTION OF THE FRONT WHEEL ARCH COVER FRONT .

• Unlock hose (1) and remove from filler channel (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1).
• Unclip hose pipes (2).
• Remove washer fluid reservoir (3) to the front.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1) and disconnect.
• Unclip the cable from the washer fluid reservoir (3).
• Unlock hose pipe (2) and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.