Performing the initialization
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
The re-initialization is carried out as follows:
- Fully close the window by pulling the switch so that the top end stop is reached.
- The switch must remain pulled during the procedure.
- The power window is initialized when the top end stop is reached.
The initialization was successful if the window can be opened and closed without errors in the automatic mode (toll mode).