LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2019 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 576 (Functional Descriptions - F25 - Charging System, Anti-Theft, Body Electrical Systems) >> Body Electrical System - Functional Description >> Power window regulator >> Notes for Service department >> Notes on encoding/programming

Notes on encoding/programming

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Initialize power window regulators

When programming and encoding of the footwell module is complete, the front power window regulators must be reinitializes. When programming and encoding of the junction box electronics is complete, the rear power window regulators must be reinitializes.

scientia non olet · About LEMON Manuals