Notes for Service department
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
General notes
After replacement of a seat module, a seat standardization must be carried out. A service function is available for the seat standardization.
Seat standardization comprises the following:
- Teach-in of mechanical end stops to define the adjustment range of the seat.
- Adjusting of stiff movement for the output limitation of the drives.
We can assume no liability for printing errors or inaccuracies in this information and reserve the right to introduce technical modifications at any time.