Functional description
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Several driver assist systems are automatically active after each engine start via the start/stop button.
- Press the driver assistance system operating facility button:
A menu is displayed on the central information display. Settings can be made. The individual settings for the currently used remote key will be stored.
- Briefly press the driver assistance system operating facility button:
Driver assist systems are individually switched off depending on the individual setting. LED lights up orange or goes out depending on the individual setting.
- Press the driver assistance system operating facility button again:
All driver assist systems are being switched on. The LED lights up green.
- Press the driver assistance system operating facility button again:
All driver assist systems are being switched off. The LED goes out.
| Item | Explanation |
|---|---|
| 1 | Button of driver assistance system operating facility (dependent on optional equipment) |
| 2 | Hazard warning switch |
| 3 | six-pin plug connection |