LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2019 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 576 (Functional Descriptions - F25 - Charging System, Anti-Theft, Body Electrical Systems) >> Body Electrical System - Functional Description >> Center console operating facility >> Diagnosis instructions >> Failure of the component

Failure of the component

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Under normal circumstances malfunctions in the center-console control panel will be limited to failures in individual button assemblies. The ICM monitors the connected buttons for the following conditions:

The controller does not monitor the connected buttons. If a button is pressed and held continuously (e.g. using a handbag), a fault is entered in the fault memory of the corresponding control unit.

A function check of the buttons can be run using the diagnosis system.

We can assume no liability for printing errors or inaccuracies in this information and reserve the right to introduce technical modifications at any time.

scientia non olet · About LEMON Manuals