LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2019 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Airbag, Audio, Navigation And Anti-Theft - Repair) >> Anti-Theft Alarm System >> 65 75 055 Removing and installing/replacing emergency power siren with tilt sensor

65 75 055 Removing and installing/replacing emergency power siren with tilt sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

NOTE: The following operations occur with mounted front wheel.

Unscrew nuts (2).

Remove emergency power siren (4) with bracket (3).

Unlock associated plug connection (1) and disconnect.

Remove emergency power siren (4) with bracket (3).

Replacement: 

Slacken nut (5).

Remove emergency power siren (4) from holder (3).

Fig 1: Identifying Emergency Power Siren With Bracket
G09950140Courtesy of BMW OF NORTH AMERICA, INC.