66 20 535 Removing and installing/replacing a rear right ultrasonic sensor (Park Distance Control)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Risk of burning!
Work on the exhaust system may only be carried out when it has cooled down!
Work on the exhaust system may only be carried out when it has cooled down!
NOTE:
Ultrasonic transducers (1) can be removed without the bumper panel being removed.
Release retaining tabs.
Pull ultrasonic sensor (1) out of bracket and unlock and disconnected associated plug connection.
Installation note:
Before installation of ultrasonic sensor (1) on wiring harness, clean plug connection!
Installation note:
Make sure rubber ring (1) is correctly seated on ultrasonic sensor (2).