72 11 092 Removing and installing or replacing rear left or right seat belts
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove left or right REAR SEAT
- Remove CAPPING IN LUGGAGE COMPARTMENT
Removing left or right inertia reel mechanism:
Release screw (1) on retractor mechanism (2).
Remove inertia reel mechanism (2).
Installation note:
Replace screw (1).
Tightening torque 72 11 20AZ .
Automatic reel (2) is encoded against incorrect assembly.
Release screw (1).
Remove seat belt.
Installation note:
Replace screw (1).
Tightening torque 72 11 21AZ .
End fitting is encoded to prevent incorrect assembly.